[ Home ] [ Harps Index ] [ Favorite Links ] [ Site Map ]

Lever Repair and Adjustment

 It's possible that the lever handle for the large lever assemblies will break if given a sufficient enough blow, and the broken lever handle is easily replaced by using a Torx T-6 screwdriver, after first removing the lever assembly from the harp with the T8 screwdriver.

Tool Kit

4 mm Drive-Loc Nut Driver            
5mm Drive-Loc Nut Driver              
6mm Drive-Loc Nut Driver               
Drive-Loc VI Handle                       
Storage Pouch        
Proturn TORX T6                           
Proturn TORX T8                           
6.5 in. Long Nose Pliers           

5 large lever handles